A complete floor and surface protection kit for luxury home renovations and new builds. Covers 300–350m² and includes everything required to protect high-specification finishes from first fix through to handover.
Suited to medium traffic. Designed for residential projects where the floor finishes are the ones that matter most — engineered timber, large-format tile, honed stone, polished concrete, and special decorative finishes — and where a scratch or stain at the wrong moment is not an option.
Bull Board 3.0 goes down first on the most sensitive surfaces. Light, low-profile, and fabric-backed — it won't mark, shift, or leave a trace. Bull Board 5.0 covers the rest: living areas, corridors, wet areas, and anywhere trades are moving regularly through the home.
The stair guards are pre-folded from Bull Board 5.0. Standard riser dimensions, ready to install, no cutting on site.
Bull Board is unbranded, low-profile, and residue-free. It goes down clean and comes up the same way.
30 x Bull Board 3.0 — 2200 × 1100mm, 3mm honeycomb impact board, fabric backing
100 x Bull Board 5.0 — 2200 × 1100mm, 5mm honeycomb impact board, fabric backing
30 x PVC Corner Guards — 50mm × 50mm × 3000mm angle
40 x Stair Guards — 1000mm long × 270mm × 190mm, pre-folded from Bull Board 5.0
35 x Bull Board Strong Joining Tape — 48mm × 25m
12 x Low Tack Washi Tape — 70mm × 50m
50 x Bull Foam Rail Guard — 75mm × 100mm pre-slit foam tube
300–350m² total coverage across Bull Board 3.0 and 5.0 sheets
Dual-board approach — 3.0mm for sensitive and delicate surfaces, 5.0mm for active trade areas
Pre-folded stair guards cut to standard riser dimensions, no on-site fabrication
30 PVC corner guards for architraves, columns, and wall corners throughout the home
50 foam rail guards for stair handrails, balustrades, and door edge protection
Low tack tape for securing protection directly to finished surfaces without adhesive damage
No adhesive residue — clean removal at practical completion
Unbranded protection — no markings, no logos on a premium residential site
Built for luxury residential projects where floor and surface protection needs to match the quality of the finishes underneath. Suitable for:
Engineered and solid timber floor protection during active renovation and new build works
Honed stone and large-format tile protection on premium residential projects
Polished and special concrete finish protection during trades and FF&E installation
Stair and balustrade protection across full-project duration
Wet area and bathroom finish protection during tiling and fit-off phases
Entry and high-movement corridor protection on multi-level luxury homes
Floor coverage - 300–350m²
Traffic rating - Medium
Lightweight board - Bull Board 3.0 — 3mm honeycomb , fabric-backed
Primary board - Bull Board 5.0 — 5mm honeycomb , fabric-backed
Corner protection - PVC angle, 50mm × 50mm × 3000mm
Stair protection - Pre-folded Bull Board 5.0, 1000 × 270 × 190mm
Rail protection - Bull Foam Rail Guard, 75mm × 100mm pre-slit foam tube
Application - Lay flat, tape joins, low tack on finished surfaces
Kit Value $8,418.40 ex GST
A complete floor and surface protection kit for luxury home renovations and new builds. Covers 300–350m² and includes everything required to protect high-specification finishes from first fix through to handover.
Suited to medium traffic. Designed for residential projects where the floor finishes are the ones that matter most — engineered timber, large-format tile, honed stone, polished concrete, and special decorative finishes — and where a scratch or stain at the wrong moment is not an option.
Bull Board 3.0 goes down first on the most sensitive surfaces. Light, low-profile, and fabric-backed — it won't mark, shift, or leave a trace. Bull Board 5.0 covers the rest: living areas, corridors, wet areas, and anywhere trades are moving regularly through the home.
The stair guards are pre-folded from Bull Board 5.0. Standard riser dimensions, ready to install, no cutting on site.
Bull Board is unbranded, low-profile, and residue-free. It goes down clean and comes up the same way.
30 x Bull Board 3.0 — 2200 × 1100mm, 3mm honeycomb impact board, fabric backing
100 x Bull Board 5.0 — 2200 × 1100mm, 5mm honeycomb impact board, fabric backing
30 x PVC Corner Guards — 50mm × 50mm × 3000mm angle
40 x Stair Guards — 1000mm long × 270mm × 190mm, pre-folded from Bull Board 5.0
35 x Bull Board Strong Joining Tape — 48mm × 25m
12 x Low Tack Washi Tape — 70mm × 50m
50 x Bull Foam Rail Guard — 75mm × 100mm pre-slit foam tube
300–350m² total coverage across Bull Board 3.0 and 5.0 sheets
Dual-board approach — 3.0mm for sensitive and delicate surfaces, 5.0mm for active trade areas
Pre-folded stair guards cut to standard riser dimensions, no on-site fabrication
30 PVC corner guards for architraves, columns, and wall corners throughout the home
50 foam rail guards for stair handrails, balustrades, and door edge protection
Low tack tape for securing protection directly to finished surfaces without adhesive damage
No adhesive residue — clean removal at practical completion
Unbranded protection — no markings, no logos on a premium residential site
Built for luxury residential projects where floor and surface protection needs to match the quality of the finishes underneath. Suitable for:
Engineered and solid timber floor protection during active renovation and new build works
Honed stone and large-format tile protection on premium residential projects
Polished and special concrete finish protection during trades and FF&E installation
Stair and balustrade protection across full-project duration
Wet area and bathroom finish protection during tiling and fit-off phases
Entry and high-movement corridor protection on multi-level luxury homes
Floor coverage - 300–350m²
Traffic rating - Medium
Lightweight board - Bull Board 3.0 — 3mm honeycomb , fabric-backed
Primary board - Bull Board 5.0 — 5mm honeycomb , fabric-backed
Corner protection - PVC angle, 50mm × 50mm × 3000mm
Stair protection - Pre-folded Bull Board 5.0, 1000 × 270 × 190mm
Rail protection - Bull Foam Rail Guard, 75mm × 100mm pre-slit foam tube
Application - Lay flat, tape joins, low tack on finished surfaces
Kit Value $8,418.40 ex GST
