A complete floor and surface protection kit for large commercial projects with high foot traffic and active trade. Covers 600–700m² and includes everything required to protect floors, stairs, and corners from early works through to practical completion.
Suited to higher traffic environments. Designed for large-scale projects where multiple floor finishes are running simultaneously — raised access floors, vinyl, timber, tile, stone, and special concrete — and protection needs to hold up across an extended programme, not just a few weeks.
Bull Board 5.0 handles the floor. Bull Board 10.0 handles the punishment — high-impact areas, material drop zones, trolley paths, and corridor runs where 5mm isn't enough. At this project scale, both are in the kit because both are needed.
The stair guards are pre-folded from Bull Board 5.0 and cut to standard riser dimensions. They go down in seconds, stay put with low tack tape, and don't need cutting on site.
200 x Bull Board 5.0 — 2200 × 1100mm, 5mm honeycomb impact board, fabric backing
80 x Bull Board 10.0 — 2200 × 1100mm, 10mm honeycomb impact board, fabric backing
60 x PVC Corner Guards — 50mm × 50mm × 3000mm angle
40 x Stair Guards — 1000mm long × 270mm × 190mm, pre-folded from Bull Board 5.0
75 x Bull Board Strong Joining Tape — 70mm × 25m
20 x Bull Board Clear Tape — 48mm × 25m
20 x Low Tack Washi Tape — 70mm × 50m
8 x Site Mats
50 x Rail guards
600–700m² total coverage from 200 sheets of Bull Board 5.0
80 sheets of Bull Board 10.0 for high-impact zones, material paths, and trolley corridors
Pre-folded stair guards cut to standard riser dimensions, no on-site fabrication
60 PVC corner guards for columns, wall corners, and door surrounds across a large floor plate
Heavy-duty 70mm joining tape for high-traffic board joins that stay down
Full tape kit — strong join tape, clear tape, and low tack for finished surfaces
8 site mats for entry points, lift lobbies, and high-traffic thresholds
No adhesive residue — clean removal at practical completion
Unbranded protection on 5.0 & 3.0 — no markings, no logos, nothing to explain on a premium site
Built for large commercial projects where floor protection needs to perform across an extended programme and high daily trade activity. Suitable for:
Large-scale commercial office and retail fit-outs with active goods movement
Base building works where multiple floor finishes require simultaneous protection
Raised access floor protection during full-floor tenancy fit-outs
Vinyl, timber, tiled, stone, and special concrete finish protection on premium commercial projects
Multi-level stair protection across full-project duration
High-traffic corridor and materials-handling zone protection
Floor coverage - 600–700m²
Traffic rating - Higher traffic
Primary board - Bull Board 5.0 — 5mm honeycomb, fabric-backed
Heavy-duty board - Bull Board 10.0 — 10mm honeycomb, fabric-backed
Corner protection - PVC angle, 50mm × 50mm × 3000mm
Stair protection - Pre-folded Bull Board 5.0, 1000 × 270 × 190mm
Application - Lay flat, tape joins, low tack on finished surfaces
Total order Value $22,873.75 ex GST
A complete floor and surface protection kit for large commercial projects with high foot traffic and active trade. Covers 600–700m² and includes everything required to protect floors, stairs, and corners from early works through to practical completion.
Suited to higher traffic environments. Designed for large-scale projects where multiple floor finishes are running simultaneously — raised access floors, vinyl, timber, tile, stone, and special concrete — and protection needs to hold up across an extended programme, not just a few weeks.
Bull Board 5.0 handles the floor. Bull Board 10.0 handles the punishment — high-impact areas, material drop zones, trolley paths, and corridor runs where 5mm isn't enough. At this project scale, both are in the kit because both are needed.
The stair guards are pre-folded from Bull Board 5.0 and cut to standard riser dimensions. They go down in seconds, stay put with low tack tape, and don't need cutting on site.
200 x Bull Board 5.0 — 2200 × 1100mm, 5mm honeycomb impact board, fabric backing
80 x Bull Board 10.0 — 2200 × 1100mm, 10mm honeycomb impact board, fabric backing
60 x PVC Corner Guards — 50mm × 50mm × 3000mm angle
40 x Stair Guards — 1000mm long × 270mm × 190mm, pre-folded from Bull Board 5.0
75 x Bull Board Strong Joining Tape — 70mm × 25m
20 x Bull Board Clear Tape — 48mm × 25m
20 x Low Tack Washi Tape — 70mm × 50m
8 x Site Mats
50 x Rail guards
600–700m² total coverage from 200 sheets of Bull Board 5.0
80 sheets of Bull Board 10.0 for high-impact zones, material paths, and trolley corridors
Pre-folded stair guards cut to standard riser dimensions, no on-site fabrication
60 PVC corner guards for columns, wall corners, and door surrounds across a large floor plate
Heavy-duty 70mm joining tape for high-traffic board joins that stay down
Full tape kit — strong join tape, clear tape, and low tack for finished surfaces
8 site mats for entry points, lift lobbies, and high-traffic thresholds
No adhesive residue — clean removal at practical completion
Unbranded protection on 5.0 & 3.0 — no markings, no logos, nothing to explain on a premium site
Built for large commercial projects where floor protection needs to perform across an extended programme and high daily trade activity. Suitable for:
Large-scale commercial office and retail fit-outs with active goods movement
Base building works where multiple floor finishes require simultaneous protection
Raised access floor protection during full-floor tenancy fit-outs
Vinyl, timber, tiled, stone, and special concrete finish protection on premium commercial projects
Multi-level stair protection across full-project duration
High-traffic corridor and materials-handling zone protection
Floor coverage - 600–700m²
Traffic rating - Higher traffic
Primary board - Bull Board 5.0 — 5mm honeycomb, fabric-backed
Heavy-duty board - Bull Board 10.0 — 10mm honeycomb, fabric-backed
Corner protection - PVC angle, 50mm × 50mm × 3000mm
Stair protection - Pre-folded Bull Board 5.0, 1000 × 270 × 190mm
Application - Lay flat, tape joins, low tack on finished surfaces
Total order Value $22,873.75 ex GST
